Konica Minolta NC-502, User Manual

Page: 39 / 62

7
Connecting the computer and copier
7-4 NC-502
Conn
ec
tin
g
the
c
o
mp
uter
a
nd c
o
p
ier
Chap
ter
7
7.2.2 LPR Printing
Before continuing to set up the network settings, check the following:
- Check that the computer is set up to use the TCP/IP protocol.
- Check that the copier is also set up to use the TCP/IP protocol.
- Check that the printer driver has been installed on the computer.
2
Note
For instructions on installing the GDI driver, refer to the user’s guide for
the GDI driver provided with the copier. For instructions on installing the
optional PCL driver, refer to the user’s guide for the PCL driver provided
with the IC-205.
Windows 2000
1
Click [Start] - [Settings] - [Printers] to open the “Printers” folder.
2
Right-click the icon for the installed printer driver.
3
Click [Properties] to open the properties dialog box.
4
Click the “Ports” tab, and then click [Add Port].
5
In the printer ports dialog box, select
Standard TCP/IP Port
, and then
click [New Port].
6
When the “Add Standard TCP/IP Printer Port Wizard” appears, click
[Next>].
7
Enter the IP address for the copier into the
Printer Name or IP Ad-
dress box, and then click [Next>].
8
Select Custom , and then click [Settings].
9
Select LPR in the Protocol group box, enter the name of the print
queue in the
Queue Name
box (for example, “print”), and then click
[OK].
– Use characters to enter the queue name.
10
Click [Next>].
11
Click [Finish].
12
Click [Close].