Konica Minolta NC-502, User Manual

Page: 42 / 62

Connecting the computer and copier
7
NC-502 7-7
Conn
ec
tin
g
the
c
o
mp
uter
a
nd c
o
p
ier
Chap
ter
7
13
Click [Close].
14
Click [Close] or [Apply].
7.2.4 IPP Printing
Windows 2000/ Windows XP/ Windows Server 2003
Before continuing to set up the network settings, check the following:
- Check that the computer is set up to use the TCP/IP protocol.
- Check that the copier is also set up to use the TCP/IP protocol.
- Check that the printer driver has been installed on the computer.
2
Note
For instructions on installing the GDI driver, refer to the user’s guide for
the GDI driver provided with the copier. For instructions on installing the
optional PCL driver, refer to the user’s guide for the PCL driver provided
with the IC-205.
Check the IPP Settings using PageScope Web Connection
Use PageScope Web Connection to access the copier and check if IPP
printing is enabled. For instructions on using PageScope Web Connection,
refer to “8 Using PageScope Web Connection”.
1
Start up PageScope Web Connection.
2
Log in to the administrator mode.
3
Click the “Network” tab, and then select “IPP Configuration” in the
menu.
4
Check that Enable IPP is selected. If it is not selected, IPP printing is
not possible.