Konica Minolta KN-419, User Manual

Page: 40 / 52

Connecting the Computer and Copier 7
KN-419 7-11
5
Start up PageScope Light/Network Management Utility Light and log
in to the Administrator mode, select
NetWare Configuration from the
“Network” tab, and then use PageScope Light/Network Management
Utility Light to specify the following settings on the copier.
❍ Refer to “8 Using PageScope Light/Network Management Utility
Light” for details.
6
Load MONITOR.NLM using the NetWare server console.
7
From the NetWare Server console, display the print server screen,
and check that the printer name entered in step 4 is displayed for
Printer 0 and that it is listed as “Waiting for job”.
* If changes are made to settings marked with “*”, turn the machine off, then on again.
NDS Bindery
[Enable NetWare] [*] Enable (Enabled if check box is selected.)
[Frame Type] [*] Auto detect (Select the frame type suitable for your network
environment.)
[Print Server Name] Manually enter the name of the print server created in step 4.
[NDS Context Name] The context name for the
Pserver No settings required
[Print Server Password] (Only specify this setting if it is also set on the NetWare server.)
[Password Retype] (Only specify this setting if it is also set on the NetWare server.)
[Preferred File Server] No settings required The file server name for the
Pserver
[Preferred NDS Tree] The tree name for Pserver
login No settings required
[Print Queue Scan Rate]
[*] 1 (Change as necessary.)
[Connection Mode] Directory Services Bindery
[Mode] [*] NPrinter