Konica Minolta KN-419, User Manual

Page: 38 / 52

Connecting the Computer and Copier 7
KN-419 7-9
7.2.5 Connecting a Copier to the NetWare Server
Supported Environments
The controller supports the system environments described below.
Setting Up NetWare 4.x/ 5.x/ 6 Print Server Mode
1
Log in with administrator privileges.
2
Start up NWadmin.
3
Select the print service system or category container, and then select
“Print service quick setup” from the Tool menu.
4
Enter settings into the Print server name , Printer name , Print queue
name , and Volume name boxes, select Other/Unknown under Type
name , and then save the settings.
✎
Note
Specify the users who can use the queue, printer options, number
of queues, and password. Refer to the NetWare documentation for
details.
5
Start up PageScope Light/Network Management Utility Light and log
in to the Administrator mode, select
NetWare Configuration from the
“Network” tab, and then use PageScope Light/Network Management
Utility Light to specify the following settings on the copier. (Refer to
“8 Using PageScope Light/Network Management Utility Light” for
details.)
6
Load MONITOR.NLM using the NetWare server console.
NetWare version Protocol Emulation Service mode
NetWare 4.x IPX NDS / Bindery PServer / NPrinter
NetWare 5.x/6 IPX NDS / Bindery PServer / NPrinter
TCP/IP NDPS (lpr)