Konica Minolta DRYPRO 873, Operation Manual

Page: 57 / 124

1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
57
Maintenance Mode
3
The following message appears in the display window�
4
Use the [Test print] and [Calibration] buttons to move the cursor to [YES]
or [NO].
5
Press the [Service/Enter] button to select the item.
Select [YES] to enable standby mode.
Select [NO] to return to the maintenance menu.
6
Press the [Reset/Cancel] button to return to the maintenance menu.
3.6.4 Film Processing Amount
If the date is changed using [Current Date & Time], the film count
(Film Processing Amount) prior to the change may be lost.
“3.6.10 Current Date & Time” (page 67)
This displays the cumulative data of the film currently being used.
You can view the cumulative data on a daily, weekly, or monthly basis for each film size and type loaded
in the trays.
Data is calculated for film output normally and does not include calibration sheets output after film is
loaded.
Cumulative data Meaning
Daily When [Daily] is selected, the daily cumulative data for an 90-day period is displayed.
(Data for the most recent day is displayed at the top of the left pane.)
This is the total number of sheets output in the time period from 12:00:00 AM to 11:59:59
PM.
Weekly When [Weekly] is selected, the weekly cumulative data for a 12-week period is displayed.
(Data for the most recent week is displayed at the top of the left pane.)
This is the total number of sheets output in the time period from Sunday to Saturday.
Monthly When [Monthly] is selected, the monthly cumulative data for a three-month period is dis-
played.
(Data for the most recent month is displayed at the top of the left pane.)
For months with less than 31 days, the data is calculated automatically on the last day of
the month.
1
Enable maintenance mode.
“3.6.1 Enabling and Using Maintenance Mode” (page 54)