Konica Minolta DRYPRO 873, Operation Manual

Page: 67 / 124

1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
67
Maintenance Mode
7
Use the [Test print] and [Calibration] buttons to move the cursor to [YES]
or [NO].
8
Press the [Service/Enter] button to select the item.
Select [YES] to save the settings. The maintenance menu appears.
Select [NO] to return to the maintenance menu without saving the settings.
When changes are made to the main unit settings, the main unit
disconnects from and then reconnects to PC to update the set -
tings�
A message indicating that the main unit will disconnect from the
computer may appear in the display window� This is not a malfunc -
tion. The main unit quickly re-establishes a connection.
3.6.10 Current Date & Time
You can set the year, month, day, hour, and minute of the main unit and PC.
1
Enable maintenance mode.
“3.6.1 Enabling and Using Maintenance Mode” (page 54)
2
Use the [Test print] and [Calibration] buttons to move the cursor to the [Cur-
rent Date & Time] icon . Press the [Service/Enter] button to select the
item�
3
The following message appears in the display window�
4
Use the [Test print] and [Calibration] buttons to move the cursor.
The selected setting changes in the following order.
[YEAR] → [MONTH] → [DAY] → [HOUR] → [MIN] → [OK] → [YEAR] • • •
Year
Month
Day
Hour
Minutes