Konica Minolta DRYPRO 873, Operation Manual

Page: 89 / 124

1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
89
How to Clear a Film Jam
4
Rotate lever A in the direction of the arrow until the film no longer comes
out of the supply tray�
Lever A
5
When the cursor indicators light up, press the [Test print] button or the
[Calibration] button to display the next step to be taken in the display
window�
6
Remove the film from the film ejection port.
When the film is not ejected out of the ejection port after rotating
lever A five to six times, go to step 8. After completion of clearing
the film jam, if the error message is displayed, handle the error. If
the same error persists, contact Konica Minolta technical repre-
sentatives.
7
When the cursor indicators light up, press the [Test print] button or the
[Calibration] button to display the next step to be taken in the display
window�