Konica Minolta DRYPRO 873, Operation Manual

Page: 71 / 124

1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
71
Maintenance Mode
3.6.12 Network Information
This displays the network information for the main unit and the connected PC.
( If PC is not connected, the PC information is not displayed.)
1
Enable maintenance mode.
“3.6.1 Enabling and Using Maintenance Mode” (page 54)
2
Use the [Test print] and [Calibration] buttons to move the cursor to the [Net-
work Information] icon . Press the [Service/Enter] button to select the
item�
3
The following message appears in the display window�
4
Use the [Test print] and [Calibration] buttons to move the cursor to an item,
and press the [Service/Enter] button to select that item. Press the [Reset/
Cancel] button to return to the network information menu�
• [IP Address]
Press the [Service/Enter] button to display the IP address.
The top IP address is that of the main unit, and the bottom IP address is that of the
connected PC.
If PC is not connected, the PC's IP address is not displayed.
• [Subnet Mask]
Press the [Service/Enter] button to display the subnet mask.
The subnet mask of the main unit is displayed.
Subnet Mask Default Gateway
MAC Address
IP Address