Konica Minolta Di1610f, Advanced Information

Page: 136 / 268

7
Using the Utility Mode
7-2 Di1610f
7.2 Specifying the Machine Settings
From the “MACHINE SETTING” menu, various settings for the machine’s
operating environment can be specified. Refer to the following table for
details on each function.
No. Name Description
1 AUTO PANEL
RESET Whether the Auto Panel Reset function is disable or the time
(0.5 min, 1 min, 2 min, 3 min, 4 min, or 5 min) until the machine is
reset after finishing copying/printing or after performing the last
operation can be selected. If the Auto Panel Reset function is
enabled, all functions are automatically reset to their default
settings.
• The factory default setting is 1 min.
2 ENERGY SAVE
MODE If the machine performs no operations for a set length of time, it will
automatically enter the Energy Save mode. The length of time until
the machine enters Energy Save mode can be set between 1 min
and 240 min (in 1 min increments).
• The factory default setting is 15 min.
3 DENSITY (ADF) The scanning density when using the Auto Document Feeder can
be adjusted.
Mode 1: For printing lighter copies of dark documents to avoid
darkening of copies.
Mode 2: For printing copies with same density as documents.
• The factory default setting is “Mode 1”.
4 DENSITY
(BOOK) The density when scanning from the Original Glass can be
adjusted.
Mode 1: For printing copies with same density as documents.
Mode 2: For printing lighter copies of dark documents to avoid
darkening of copies.
• The factory default setting is “Mode 1”.
5 PRINT
DENSITY The copy/print density can be adjusted to one of six levels between
–3 and +3. With the normal print density at 0, choose a smaller
number for a lighter print or choose a higher number for a darker
print.
• The factory default setting is “0” (Normal).
6 LCD
CONTRAST The brightness of the display can be set to one of four levels
between –1 and +2.
• The factory default setting is “0” (Normal).
7 LANGUAGE The display language can be selected.
• The factory default setting is “English”.
8 LAMP OFF
TIME The time until the exposure lamp goes off can be adjusted.
Mode 1:When four hours have passed since the last operation was
performed
Mode 2:When the machine enters Energy Save mode
• The factory default setting is “Mode 1”.
9 BUZZER
VOLUME This function can be used to set the volume of alarms and the beep
sounded when a key is pressed.
• The manufacturer’s default setting is “LOW”.
0 INITIAL MODE This function can be used to set the mode (Copy mode or Fax
mode) that the machine starts up in or returns to after the Control
Panel is reset.
• The manufacturer’s default setting is “COPY”.