Konica Minolta Di1610f Advanced Information Download Page 222

Page: 222 / 268

When a Message Appears

8-8

Di1610f

Remove the protective cover from
the Toner Cartridge.

Note

Do not touch the developer
roller, otherwise decreased
image quality may result.

Align the blue parts of the Drum
Cartridge and Toner Cartridge, and
then attach them together.

Align the tab on the Imaging
Cartridge with the rail in the
machine, and then install the
cartridge.

Note

Do not push in the Imaging
Cartridge with excessive force if
the cartridge is not correctly
aligned on the rail, otherwise the
units may be damaged.

Close the Front Cover.

Developer roller

Blue parts

Summary of Contents for Di1610f













































































































































































































































































Search results

Summary of Contents for Di1610f

Reviews:

Related manuals for Di1610f

Brands by name

Popular brands

Konica Minolta Di1610f, Advanced Information

Search results

Summary of Contents for Di1610f

Reviews:

Related manuals for Di1610f

Brands by name

Popular brands