Konica Minolta Di1610f Advanced Information Download Page 108

Page: 108 / 268

Faxing

5-16

Di1610f

5.4

Checking Transmission Results

The transmission result information for a maximum of 60 sent and
received documents is saved.

To check the transmission result

Press the [Status] key.

Press the [ ] key.

Press the [Yes] key.

Using the [ ] and [ ] keys, display
the desired transmission results to
check them.

In the transmission result
screen, “TX” indicates sent
faxes, and “RX” indicates
received ones.

If the [No] key is pressed twice while the transmission results are
displayed, the main screen appears.

To print the transmission result report, press the [Start] key. After
the transmission result report is printed, the main screen appears.

Summary of Contents for Di1610f













































































































































































































































































Search results

Summary of Contents for Di1610f

Reviews:

Related manuals for Di1610f

Brands by name

Popular brands

Konica Minolta Di1610f, Advanced Information

Search results

Summary of Contents for Di1610f

Reviews:

Related manuals for Di1610f

Brands by name

Popular brands