Konica Minolta Di1610f, Advanced Information

Page: 104 / 268

5
Faxing
5-12 Di1610f
5.3 Basic Faxing
To fax using the Automatic Document Feeder
1
Press the [Fax] key.
The machine enters Fax mode, and
the fax screen appears.
2
Load the document to be faxed into
the Automatic Document Feeder.
H Adjust the Document Guide
Plates to fit the size of the
document.
H Load the document face up.
3
If necessary, change the “Resolution” setting (p. 5-11).
4
Using the 10-Key Pad, enter the fax
number of the recipient.
H The fax number of a previously
programmed recipient can also
be specified. Refer to
“Dialing” on page 5-1 .
5
Press the [Start] key to begin scanning and sending the fax.
H To stop the transmission, press the [Stop] key.
Once transmission is finished, a beep is sounded.
If the fax could not be sent, the transmission result report is printed
(p. 7-76).
Tip
About 19 A4-size document pages can be scanned and stored in the
memory at one time. If the optional expansion memory (32 MB
Memory for Fax) is installed, as many as 180 document pages can be
stored.