Konica Minolta Di1610f, Advanced Information

Page: 245 / 268

When a Message Appears
8
Di1610f 8-31
Calls Cannot Be Sent
Symptom Possible Cause Remedy
Nothing can be heard from
the connected telephone. The cord from the telephone
is not connected correctly to
the main unit. Correctly connect the
telephone cord to the main
unit.
The telephone cord from the
wall jack is not connected
correctly to the main unit. Correctly connect the
telephone cord from the wall
jack to the main unit.
Transmitting. Check again after the
transmission is finished.
After dialing, the ringing
cannot be heard. The telephone dialing
system is not set correctly. Correctly set the telephone
dialing system. (p. 7-71)
After the [Speaker] key is
pressed, it is difficult to hear
the recipient/caller’s voice. The monitoring volume is too
low. Increase the monitoring
volume. (p. 7-72)
The ringing of the telephone
is too low (loud). The ringer volume of the
connected telephone is set
too low (loud). Adjust the ringer volume of
the connected telephone.