Konica Minolta Di1610f Advanced Information Download Page 189

Page: 189 / 268

Using the Utility Mode

Di1610f

7-55

To delete a mailbox

Select the “FAX REGISTRATION”.

Refer to

“Selecting the “FAX REGISTRATION” menu” on

page 7-24

Press the [6] key from the 10-Key
Pad to select “MAILBOX”.

Using the 10-Key Pad, enter the
number of the mailbox that you wish
to delete.

Press the [No] key.

A screen appears, allowing you to
enter the mailbox ID.

Using the 10-Key Pad, enter the 4-
digit mailbox ID, and then press the
[Yes] key.

If you wish to change the ID,
press the [No] key, and then enter the new number.

The specified mailbox is deleted.

Press the [Panel Reset] key.

The main screen appears again.

Summary of Contents for Di1610f













































































































































































































































































Search results

Summary of Contents for Di1610f

Reviews:

Related manuals for Di1610f

Brands by name

Popular brands

Konica Minolta Di1610f, Advanced Information

Search results

Summary of Contents for Di1610f

Reviews:

Related manuals for Di1610f

Brands by name

Popular brands