Konica Minolta BIZHUB C353P, User Manual

Page: 268 / 516

C353P 8-27
Settings for control panel
8
2
Note
[AuthDeviceSetting] is displayed when the authentication unit and HDD are installed.
[CardAuth.Settings] is displayed when the IC card authentication unit is installed.
[BioAuth.Settings] is displayed when the biometric authentication unit is installed.
!
Detail
To use biometric authentication, register the vein patterns in the finger in advance.
For details on specifying authentication settings for the authentication unit (biometric type) and on
registering finger vein patterns, refer to
"Authentication unit (Biometric type AU-101)" on page 14-2
or "Authentication unit (IC card type AU-201)" on page 15-2 .
Expert Adjustment
Menu Description Default
Setting
PrinterAdjustment Leading Edge Adj. Adjust the starting print position between -3.0 and 3.0
mm at the leading edge of the paper (with respect to
the paper feed direction). Adjustments can be speci-
fied for each paper type. 0.0mm
Centering Adjust the starting print position between -3.0 and 3.0
mm at the left edge of the paper (with respect to the
paper feed direction). Adjustments can be specified
for each paper tray. 0.0mm
Leading (Duplex) Adjust the starting print position between -3.0 and 3.0
mm at the leading edge of the paper for the second
side during automatic double-sided copying. Adjust-
ments can be specified for each paper tray. 0.0mm
Centering (Duplex) Adjust the starting print position between -3.0 and 3.0
mm at the left edge of the paper for the second side
during automatic double-sided copying. Adjustments
can be specified for each paper tray. 0.0mm
Vertical Adj. Specify a zoom in the paper feed direction within the
range from -7 and +7. 0
EraseLeadingEdge Specify the non-printing area of the leading edge of
the paper. 4mm
Finisher Adjust Center Staple Pos Adjust the stapling position (between -10 and 10 mm)
when printing with the "Center Staple & Fold" setting. 0.0mm
Half-Fold Pos. Adjust the folding position (between -10 and 12.7 mm)
when printing with the "Center Staple & Fold" setting. 0.0mm
DensityAdjustment Thick/Yellow Adjust the image density for printing on thick paper or
transparencies. The density can be adjusted separate-
ly for each color (yellow, magenta, cyan and black for
a color image and the black image density). The higher
the setting, the darker the density.
Adjust the setting for yellow, magenta, cyan and black
between -5 and +5.
Adjust the setting for "Black Image Density" between -
2 and +2. 0
Thick/Magenta 0
Thick/Cyan 0
Thick/Black 0
BlackImageDensity 0
Stabilization IniStabi. Perform an image stabilization if the image is incorrect,
even after the gradation levels have been adjusted.
•
IniStabi.: Perform a normal image stabiliza-
tion.
• StabilizationOnly: Select when a good result was
not achieved after "IniStabi". was selected.
Initial-
ize+Stabi.
StabilizationOnly
ColorRegistration Yellow Adjust the color registration if color shifts can be seen
in the print result. 0
Magenta 0
Cyan 0
Test Pattern Gradation Pattern Print the test pattern of each color gradation. –
Halftone Pattern Print the test pattern of each halftone. –