Konica Minolta BIZHUB C353P, User Manual

Page: 264 / 516

C353P 8-23
Settings for control panel
8
2
Note
The parameters for [TCP/IP], [HTTP Server], [SNMP], [AppleTalk], and [Bonjour] are displayed when
"ON" is specified for [TCP/IP Setting], [HTTPServerSetting], [SNMP Setting], [AppleTalkSetting], and
[Bonjour Setting].
If the network settings are changed, restart the machine to apply changes.
When the power is turned off, then on, turn off the power, wait at least 10 seconds, and then turn it on.
Otherwise, the machine may not operate correctly.
Printer Settings
System Connection
2
Note
[OpenAPI Settings] - [SSL] are not displayed when the SSL certificate is not installed or "ON" is
specified for [EnhancedSecurity].
[CallRemoteCenter] is not displayed if center registration performed by selecting [Service Mode] - [CS
Remote Care] is not completed. For details, contact your service representative.
TCP Socket TCP Socket Specify settings for using the TCP Socket function. –
TCP Socket ASCII Specify settings for using the TCP Socket (ASCII)
function. –
Detail Settings Network Speed Select the operating speed. Auto Set-
ting
TimeAdjustmentSet Specify settings for the NTP server for which the time
is corrected. –
When InvalidCert. Specify the operation when the validity period for the
received certificate has expired.
If "Continue" is selected, processing continues even if
the date of the certificate is invalid.
If "Delete Job" is selected, the job is deleted if the date
of the certificate is invalid. Continue
Ping Confirmation Sends a ping to confirm a response. –
Menu Description Default
Setting
Menu Description Default
Setting
USB Timeout Specify the length of time until a transmission timeout occurs. 60sec
Network Timeout Specify the length of time until a transmission timeout occurs. 60sec
Print XPS Errors Specify whether to print the error message when an error occurs during
XPS printing. ON
Menu Description Default
Setting
OpenAPI Settings Access Setting Select whether or not OpenAPI access is enabled. Allow
Enable SSL Select whether or not SSL is enabled. ON
Authentication Select whether or not user authentication is per-
formed. –
PortNumberSetting Specify the port number. 50001
CallRemoteCenter
→
Transmits the status of the machine to the center.