Konica Minolta Bizhub 222, Service Manual

Page: 812 / 846

Field Service Ver. 1.0 Dec. 2008 4. Other
11
SD-507
MAINTENANCE
14. Unplug the connector [13].
15. Remove two screws [14] and two
screws [15].
16. Remove the Tray [16].
17. Unplug all the connectors on the
Main Control Board.
18. Remove the PWB support, and then
remove the Main Control Board [17].
19. Remove the screw [18], and then
remove the Mounting Bracket [19]
and the Lock Release Lever [20].
NOTE
• Be careful that when the Mounting
Bracket [19] is removed, the spring
[21] is also removed.
• When installing the spring, install
the end of spring [21] into the gap
[22] between the ribs.
[13]
[14]
[15]
A0PGF2C505DA
[16]
4511F2C521DA
[17]
[18]
[20]
[19]
[20]
[21] [22]