manualshive.com logo in svg

Konica Minolta Bizhub 222, Service Manual, Page: 738 / 846

Share
Download
Konica Minolta Bizhub 222 Service Manual Download Page 738

Field Service Ver. 1.0 Dec. 2008

3. Firmware upgrade

7

FS-530/PU-501/OT

-602

MAINTENANCE

3.

Firmware upgrade

3.1

Preparations for Firmware rewriting

3.1.1

Service environment

• Drive which enables writing/reading of Compact flash
• Compact flash (with 32 MB or more)

3.1.2

Writing into the Compact flash

• Copy the firmware files using the computer.

NOTE
• Copy only those files to be upgraded to the compact flash.
• If wrong firmware is copied, no screen display is given and thus no firmware can 

be downloaded.

3.1.3

Checking ROM version

• Before attempting to upgrade the firmware, check the current ROM version.

See P.210 of the main body service manual.

3.2

Firmware rewriting

3.2.1

Finisher

NOTE
• NEVER remove or insert the Compact Flash card with the machine power turned 

ON.

• Make sure that the MSC firmware has not been copied to the compact flash card.
• The engine firmware and Finisher firmware can be upgraded at the same time.

See P.41 of the main body service manual.

• If the files copied to the compact flash card are those of either the engine or Fin-

isher, or wrong, no screen display is given and thus no firmware can be down-
loaded.

1.

Turn OFF the main power switch.

2.

Remove the Compact flash Cover 
[1].

3.

Insert the compact flash card [2], to 
which the finisher upgrading files 
have been copied, into the slot.

4040F2C596DA

[1]

4040F2C597DA

[2]

Summary of Contents for Bizhub 222















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments