Konica Minolta Bizhub 222, Service Manual

Page: 531 / 846

11. Soft Switch Settings Field Service Ver. 1.0 Dec. 2008
144
FK-503
ADJUSTMENT/
SETTING
NOTE
• The features with (*) are settable by users. <*>: Soft switch setting
MODE Factory setting bit
429
Bit: 7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0
HEX:00 (For U.S.)
HEX:04 (For Europe)
Bit Feature
Logic
Description
0 1
7 Set drum dry when
engine power is on Not exe-
cute Execute Set whether to switch automatically to
Photo mode when selecting OHP trans-
parencies.
6 Correspond to OHP offset Not
switch
quality
mode Switch
quality
mode
5 Automatically reset values
on the basic screen at
completion of copying
using the document
feeder. <*> No Yes
4 Set curl correction Bit 4-3: 00 Not control
3 01 All-environ-
ment control
10 Control for
HH, LL envi-
ronments
11 Not available
2 Correspond to fluores-
cent lamp flickering Control Not con-
trol
1 Setting of time that fan
spin at full speed. Bit 1-0: 00 20 sec
0 01 55 sec
10 10 min
11 Not available
MODE Factory setting bit
430
Bit: 7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0
HEX:00
Bit Feature
Logic
Description
0 1
7 Impossible to set up multi job Possible Impossi-
bility Prevent multi job setting, even if the
multi job is available structurally.
5 Check consistency with HDD
file No Yes Sets whether or not to check consis-
tency with HDD when the main
switch is ON.