Konica Minolta Bizhub 222, Service Manual

Page: 534 / 846

Field Service Ver. 1.0 Dec. 2008 11. Soft Switch Settings
147
FK-503
ADJUSTMENT/
SETTING
NOTE
• The features with (*) are settable by users. <*>: Soft switch setting
MODE Factory setting bit
438
Bit: 7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0
HEX:00
Bit Feature
Logic
Description
0 1
7 Type of Management
Device Bit 7-5: 001 Authentica-
tion device
(PageACSES) Sets the type of the
management
device.
6 010 Management
Device 1
5 011 Management
Device 2
100 Key Counter
Only
101 Vender 1
110 Vender 2
111 Not available
4 ID key when using the
Management Device 2 Does not
use ID key
(mode 1) Uses ID
key (mode
2) Sets whether or not to use ID key for
log out when Management Device is
mounted.
3 Vender type Bit 3-2 00 Coin vender Sets the type of the
Vender 2
2 01 Card keeper
10 Coin vender/
Card keeper
11 Not available
1 Report output invalid
when Vender is con-
nected Key
counter is
necessary Opening of
Adminis-
trators Sets whether or not Key Counter is
necessary for Report output when
Vender 2 is connected.
0 Switches the message
when power is not ON Message 1 Message 2 Selects one of the messages below to
be displayed when power is not sup-
plied to Vender 2.
Message 1: “Please turn on Vender
unit”
Message 2: “Please wait”