Konica Minolta AccurioPress C2060, Quick Manual

Page: 61 / 184

AccurioPress C2070series 5-5
5.1 Loading Paper 5
5.1.2 Loading paper into the Paper Feeder Unit PF-602m
The following describes how to load paper into an optional Paper Feeder Unit PF-602m . The same paper
loading procedure is used for Tray 3 and Tray 4 .
d
Reference
For information about how to load paper into other optional paper feeder unit, refer to the [HTML User's
Guide].
1
Pull out the tray to load paper into.
NOTICE
Trays can be pulled out only when this machine is turned on.
Before pulling out the target tray, check that the
sub power
switch is turned on.
In order to prevent the machine from falling down, only one
tray can be pulled out at a time.
2
Turn the side guide lock knobs (4 pieces) counterclock-
wise to loosen them.
3
While pressing the side guide lock release lever ( ),
slide the side guide plates to any positions ( ).
%
Determine their locations based on the size indicator of
the bottom plate of the tray.
NOTICE
To slide the side guide plates , be sure to hold both side
guide plates together. If you move it by holding only either
of the side guide plate , the side guide plate that held may
become displaced.
4
While pressing the rear guide lock release lever , slide the
rear guide plate to any positions.
% Determine their locations based on the size indicator of
the bottom plate of the tray.
5
To fix the side guide plates at the correct locations, load an appropriate amount of paper into the tray
while aligning it to the left-hand side of the tray.
NOTICE
Load paper with the print side facing up.
6
Press the side guide plates against paper, then turn the side guide lock knobs
(4 pieces) clockwise to fix them.