Komatsu PC210-11, Operation & Maintenance Manual

Page: 33 / 522

• Before standing up from the operator's seat (such as when
opening or closing the front window, or when removing or
installing the bottom window, or when adjusting the opera-
tor's seat), always lower the work equipment completely to
the ground, set lock lever (1) securely to the LOCK position
(L), then stop the engine. If you accidentally touch the con-
trol levers (pedals) when they are not locked, there is a
hazard that the machine may suddenly move and cause
serious injury or property damage.
Warning when reversing
• h. Take care when reversing.
To prevent SEVERE INJURY or DEATH, do the following be-
fore moving machine or its attachments:
• Sound horn to alert people nearby.
Be sure no one is on or near machine or in swing area.
Rotate cab for full view of travel path if it can be done safe-
ly.
Use spotter if view is obstructed.
Follow the above even if machine is equipped with travel
alarm, mirrors and rear view camera.
k k
WARNING
To open or close the front or ceiling window, never
stand up from the operator's seat before throwing the
safety lock lever to the lock position.
Inadvertently touching any of the working equipment
control levers might cause the machine to start mov-
ing all of a sudden, probably resulting in a serious in-
jury.
SAFETY SAFETY LABELS
2-9