Komatsu HD325-8, Operation & Maintenance Manual

Page: 83 / 464

At the same time, the centralized warning lamp lights up and alarm buzzer sounds intermittently.
Wait until the caution lamp goes out, and then start the machine.
DEF LEVEL CAUTION LAMP
DEF level caution lamp alerts when DEF tank level becomes
low.
Whenever the caution lamp lights up in red, immediately add
DEF.
Fault conditions that result in activation of the Inducement strat-
egy for engine derates to prompt to maintain or repair the emis-
sion control system.
When Lightning in red
With Action level “L04”, DEF tank level is too low. Inducement
status is “Severe Inducement”. Engine power is under heavy
deration.
With Action level “L03”, DEF tank level is low. Inducement status is “Low level Inducement”. Engine power is
under deration.
With No Action level display. DEF tank level is lower. Inducement status is “Continuous Warning”. Need to add
DEF immediately to avoid advancing to the next Inducement status.
With No Action level display. Warning starts. Inducement status is “Warning”. Need to add DEF immediately.
When Lightning in white
When fluctuation of DEF tank level is large, frozen, or not limited to, tank level sensing is not performed correct-
ly.
When DEF is added after engine starting switch turn to OFF.
When DEF tank level sensor is defective.
SEATBELT CAUTION LAMP
The seat belt caution lamp lights up in red when the seat belt is
not fastened.
Always fasten the seat belt while traveling because there may
be a possible danger.
STEERING SYSTEM CAUTION LAMP
The steering system caution lamp warns about abnormality in
the steering system.
When the action level “L03” is displayed
The caution lamp lights up in red.
At the same time, the centralized warning lamp lights up and
the alarm buzzer sounds intermittently.
Stop the operation, move the machine to a safe place, stop the
engine, then ask your Komatsu distributor for the inspection
and maintenance.
When the action level “L01” is displayed
The caution lamp lights up in yellow.
When you finish the operation, always perform the inspection and maintenance.
OPERATION EXPLANATION OF COMPONENTS
3-23