BASIC OPERATION OF MACHINE MONITOR WHEN TROUBLE OCCURS WHILE
OPERATING MACHINE
If any trouble occurs during operation, the standard screen BB changes to the failure display screen FF.
When ENTER switch displayed in the guidance icon is press-
ed, “Current Abnormality” screen is displayed.
REMARK
The guidance icon is displayed only while the machine is stop-
ped completely.
Even when ENTER switch is pressed while the machine is not
stopped completely, “Current Abnormality” screen is not dis-
played.
WARNING DISPLAY
NOTICE
The machine has a trouble if any of the action levels “L01” to “L04” is displayed on the machine moni-
tor.
Take appropriate actions following the list of action level displays and required actions.
• These caution lamps do not guarantee the condition of the machine.
Do not simply rely on the caution lamp when performing check before starting (start-up inspection).
Always get off the machine and check each item directly.
• When the caution lamp is displayed in red, the machine will be seriously affected if it is left without
any action being taken.
Take the action immediately.
• The engine output or engine speed may be limited and the machine operation speed may become
slow, depending on the contents of the warning.
OPERATION
EXPLANATION OF COMPONENTS
3-17
Summary of Contents for HD325-8
