Komatsu HD325-8, Operation & Maintenance Manual

Page: 75 / 464

REMARK
• Contact your Komatsu distributor for the method of setting, changing, or canceling the operator identifica-
tion function.
• Depending on the set value of ID holding time in set items of operator identification function, even if input-
ting the ID number for operator identification setting is set, the ID number input screen LL (with SKIP) or
MM (without SKIP) may not be displayed while the starting switch is turned to ON position.
If inputting the incorrect ID number for 3 times continuously, you cannot input the ID number for 5 minutes. Wait
for more than 5 minutes, try inputting the ID number again.
As long as the ID number input screen is displayed, the engine cannot be started. If you forget the ID number
and cannot start the engine, confirm the person in charge of the machine.
NOTICE
The operator identification function is not for security or protection against theft. Do not use for securi-
ty.
Komatsu cannot take responsibility for any loss or damage from the wrong use of ID or unauthorized
use of ID by a third person.
BASIC OPERATION OF MACHINE MONITOR WHEN STARTING ENGINE IN AB-
NORMAL SITUATION
If there is an abnormality when starting the engine
When the machine monitor is started, if the machine has a trouble, the starting screen AA is displayed for 2
seconds and then it is changed to the failure display screen FF.
When ENTER switch displayed in the guidance icon is press-
ed, “Current Abnormality” screen is displayed.
OPERATION EXPLANATION OF COMPONENTS
3-15