Komatsu HD325-8, Operation & Maintenance Manual

Page: 437 / 464

1.
Press the menu switch (1) to display “Machine Setting and
Information” menu, select “Payload Meter”, then press EN-
TER switch (2).
2.
Select “Accumulated Payload and Total Cycles”, then
press ENTER switch (2).
The accumulated payload and the total number of cycles
are displayed as shown in the figure.
• The date and time of start are those when the data of
“Accumulated Payload and Total Cycles” have been
reset last.
• The date and time of finish are those of the last dump-
ing.
• Accumulated value since they have been last reset is
displayed in “Accumulated Payload and Total Cycles”.
• The display range is from 0 to 99999999.9t and 0 to
999999 cycles respectively. When they reach the upper limits, they are kept at the upper limits until
they are reset.
3.
Press ENTER switch (2).
The pop-up window of the data reset is displayed.
Press RETURN switch (3), and the screen returns to “Pay-
load Meter” menu.
4.
Press ENTER switch (2) while the pop-up window shown
in the figure is displayed.
“Accumulated Payload and Total Cycles” are reset, and the
pop-up window closes.
If you press RETURN switch (3), and the pop-up window
closes without doing anything.
ATTACHMENTS AND OPTIONS HANDLING PAYLOAD METER
6-9