Komatsu Galeo HD405-7R, Operation & Maintenance Manual

Page: 44 / 361

.
SAFETY
PRECAUTIONS FOR MAINTENANCE
Danger of sparks
There is hazard that sparks will be generated, so always observe the following.
Do not let tools or other metal objects make any contact between the battery cables. Do not leave tools lying
around near the battery.
When removing the battery cables, remove the ground cable (negative (-) cable) first. When installing,
connect the positive (+) cable first, then connect the ground.
Tighten the battery cable terminals securely.
Secure the battery firmly in the specified position.
PRECAUTIONS WHEN USING HAMMER
When using a hammer, pins may fly out or metal particles may be
scattered. This may lead to serious personal injury or death.
Always do as follows.
If pins are hit with a hammer, there is a hazard that the metal
particles may fly out and injure people in the surrounding area.
Always make sure that no-one is in the surrounding area before
using the hammer.
If hard metal parts such as pins, or bearings are hit with a
hammer, there is a hazard that pieces might be scattered and
cause serious personal injury or death. Always wear safety
glasses and gloves.
If the pin is hit with strong force, there is a hazard that it may fly
out and injure people in the surrounding area. Do not allow
anyone to enter the surrounding area.
PRECAUTIONS WITH HIGH-TEMPERATURE COOLANT
To prevent burns from boiling water or steam spurting out when
checking or draining the coolant, wait for the coolant to cool down
to a temperature where the radiator cap can be touched by hand.
Then loosen the cap slowly to release the pressure inside the
radiator, and remove the cap.
PRECAUTIONS WITH HIGH-TEMPERATURE OIL
To prevent burns from hot oil spurting out or from touching
high-temperature parts when checking or draining the oil, wait for
the oil to cool down to a temperature where the cap or plug can be
touched by hand. Then loosen the cap or plug slowly to release the
internal pressure and remove the cap or plug.
2 - 33