Komatsu Galeo HD405-7R, Operation & Maintenance Manual

Page: 313 / 361

.
ATTACHMENTS, OPTIONS
HANDLING PAYLOAD METER II (CARD TYPE)
Method of clearing total payload and overall number of cycles
1. Press TOTAL/SFT switch (1) to display the total payload and
overall number of cycles.
2. Keep CAL/CLR switch (2) pressed for at least 2 seconds.
The total payload or overall number of cycles display will flash.
3. Keep CAL/CLR switch (2) pressed again for at least 2
seconds.
After "0000" is displayed for 2 seconds, if the display returns to
the normal operation display, the zero clear operation is
completed.
REMARK
The zero clear operation for the total load and overall number of cycles is carried out at the same time.
It is impossible to carry out the zero clear operation individually for only one of these items.
The maximum limit for the total payload and overall number of cycles is as follows.
Total payload: 999900.0 t
Overall number of cycles: 9999 times
If either the total payload or overall number of cycles goes above the set value, error code [H: FUL] is displayed.
Carry out the zero clear operation for the total payload and overall number of cycles before error code [H:FUL]
is displayed.
If either the total payload or overall number of cycles exceeds the maximum limit, both values will be
automatically cleared.
Once error code [H:FUL] is displayed, it is impossible to forcibly clear the data or cancel the display until the value
exceeds the limit and the data are automatically cleared.
6 - 34