Komatsu Galeo HD405-7R, Operation & Maintenance Manual

Page: 309 / 361

.
ATTACHMENTS, OPTIONS
HANDLING PAYLOAD METER II (CARD TYPE)
TOTAL PAYLOAD, OVERALL NUMBER OF CYCLES DATA
The total payload and overall number of cycles from any desired time are calculated and are recorded with each
act of dumping.
The calculation of both values is started from the point where the ZERO CLEAR switch is pressed for the total
payload and overall number of cycles.
Both total values can be displayed on the monitor panel by the using the operation given in "FORCED DISPLAY
OF TOTAL PAYLOAD AND OVERALL NUMBER OF CYCLES (PAGE 6-33)". (See the same section for details
of the method for ZERO CLEAR.)
The total payload is also displayed automatically when dumping.
The maximum limit that can be recorded for the total payload and overall number of cycles is 999900.0 metric tons
or short tons, and 9999 cycles.
Item Unit Range
Total payload MT or ST 0 - 999900.0 This shows the total value from the zero clear point
Overall number of cycles Times 0 - 9999
Year (last 2 digits) Year 0 - 99
Month Month 1 - 12
Day Day 1 - 31 Data and time shows time of zero clear operation
Time Hour Hour 0 - 23
Time Min Minute 0 - 59
(MT: Metric Ton; ST: Short Ton)
OTHER DATA
Content Item Unit Range
Set data for
operator check
mode
Machine ID Integer 0 - 200 Set using switch input operation
Open ID Integer 0 - 200
For details, see section on operator check
mode
Speed limit km/h 0 - 99
Option code Integer 0 - 11
Calibration data
Year (last 2 digits) Year 0 - 99
Month Month 1 - 12
Day Day 1 - 31
Data and time when calibration was carried
out
Time Hour Hour 0 - 23
Time Min Minute 0 - 59
Data written by
user
Data 1 - 20 characters
Comments which can be written freely to
the payload meter. However, they can only
be input using the cable communications
from the personal computer. (See the
software manual.)
Data 2 - 20 characters
Data 3 - 20 characters
Data 4 - 20 characters
6 - 30