Komatsu Galeo HD405-7R, Operation & Maintenance Manual

Page: 296 / 361

.
ATTACHMENTS, OPTIONS
HANDLING PAYLOAD METER II (CARD TYPE)
DETAILS OF SWITCHES ON LEFT SIDE
No. Name Type Remarks
1 Payload gain adjustment
trimmer
Rotary volume
-20% to 20%
(Turn to left) - (Turn to right)
2 Speed regulation switch 0 - F Rotary switch 0: 107 % to 7: 100 % to F: 92 %
3 Distant regulation switch 0 - F Rotary switch 0: 107 % to 7: 100 % to F: 92 %
4 Model selection switch 0 - F Rotary switch Refer to model selection chart
5 Use of memory-card switch 2-Stage selector switch Up: not used; Down: used
6 Use of clinometer switch 2-Stage selector switch Up: not used; Down: used
7 Mass unit setting switch 2-Stage selector switch
Up: metric tons; Down: short tons
8 Forced prohibition setting
for switches
2-Stage selector switch
Up: permitted
Down: prohibited
According to permitted/prohibited setting table
for switches
B Buzzer volume regulation Rotary volume
For MIN volume, turn to RIGHT
For MAX volume, turn to LEFT
NOTICE
The switches on the left side are set when the machine is shipped from the factory.
Do not touch any switch except No. 7 and No. B.
If you wish to adjust any switch except No. 7 and No. B to compensate the payload calculation value or speed or distance
calculation value, please contact your Komatsu distributor.
6 - 17