.
OPERATION
OPERATION
STOPPING ENGINE
NOTICE
If the engine is suddenly stopped without allowing it to cool down, there is
danger that the life of the engine parts will be shortened, so never stop the
engine suddenly except in emergency.
Allow the engine to cool down gradually before stopping it.
1. Set the shift lever to the N position, then set the parking brake
switch to the PARKING position.
2. Lower the dump body and set the dump lever to the HOLD
position.
3. Run the engine at low idle for about 5 minutes to cool down
gradually.
4. Turn the key of starting switch (1) to the OFF position to stop
the engine.
5. Remove the key from starting switch (1).
CHECKS AFTER STOPPING ENGINE
1. Walk around the machine and check the dump body, body work, and undercarriage, and check also for leakage
of oil and water.
2. Fill the fuel tank.
3. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard.
4. Remove any mud affixed to the undercarriage.
3 - 92
Summary of Contents for Galeo HD405-7R
