Komatsu D375A-8, Operation & Maintenance Manual

Page: 68 / 466

On the ID number input screen LL (with SKIP), press the
switch F1, and the screen changes to the check before
starting screen BB without inputting ID number.
REMARK
• The operator identification function should be operated on-
ly by the specified operator by the supervisor.
• Contact your Komatsu distributor for the method of setting,
changing, or canceling the operator identification function.
• Depending on the set value of ID holding time in set items
of operator identification function, even if inputting the ID
number for operator identification setting is set, the ID
number input screen LL (with SKIP) or MM (without SKIP)
may not be displayed while the starting switch is turned to
ON position.
If the incorrect ID number is inputted for 3 times in a row, you cannot input the ID number in the next 5 minutes.
Wait for more than 5 minutes, and try inputting the ID number again.
As long as the ID number input screen is displayed, the engine cannot be started. If you forget the ID number
and cannot start the engine, confirm the ID number with the person in charge of the machine.
NOTICE
The operator identification function has no anti-theft effect. It is neither for security enhancement nor
for a protection against theft. Do not use it for the purpose of security enhancement.
Komatsu cannot accept any responsibility for any loss or damage resulting from the wrong use of ID or
unauthorized use of ID by a third party.
EXPLANATION OF COMPONENTS OPERATION
3-10