Komatsu D375A-8, Operation & Maintenance Manual

Page: 436 / 466

2.
Take out the hose (1) and loosen the drain plug (2) to drain
the oil.
3.
After draining the oil, tighten the drain plug (2).
4.
Remove the rear cover (3) of the L.H. side cover and the
cover (4) on the L.H. fender.
5.
Loosen the bolt (5) and remove the case (6).
6.
Take out the strainer (7) and magnet (8).
If strainer (7) and magnet (8) are broken, replace them
with new ones.
7.
Loosen the bolt (9) and separate the strainer (7) from mag-
net (8).
Tightening torque of bolt (9)46 to 59 Nm {4.7 to 5.9 kgm}
8.
Remove all dirt from strainer, then wash it in clean diesel
fuel or flushing oil.
Clean the case interior and plugs as well.
9.
Install the strainer as before.
MACHINE WITH MINING SPECIFICATION ATTACHMENTS AND OPTIONS
6-40