4.
Turn the starting switch key (2) to START position (C).
The engine will start.
5.
When the engine starts, release the starting switch key (2).
The key will return automatically to ON position (B).
REMARK
• White smoke may be discharged for a short time im-
mediately after the engine is started or during the af-
tertreatment devices regeneration in cold season, but
this is not a failure.
• The smell of the exhaust gas is different from that of
the conventional diesel engine because of the exhaust
gas filtering function.
6.
After the engine starts, wait for the engine oil pressure caution lamp to go out. Do not perform the work
equipment operation or travel while the engine oil pressure caution lamp is lit.
REMARK
If the engine oil pressure caution lamp does not go out in 4 to 5 seconds, stop the engine immediately.
Check the oil level, oil leakage, etc. and take proper measures.
METHOD FOR STARTING ENGINE IN COLD WEATHER
k
k
WARNING
• Start the engine only while sitting on the operator's seat.
• Do not attempt to start the engine by short-circuiting the engine starting circuit. Doing so may
cause a serious personal injury or death or fire.
• Check that there is no person or obstacle around the machine, then sound the horn and start the
engine.
• Never use the starting aid fluids to start the engine as they may cause explosions.
• Exhaust gas is toxic. When starting the engine in confined spaces, be particularly careful to ensure
good ventilation.
OPERATION
MACHINE OPERATIONS AND CONTROLS
3-155
Summary of Contents for D375A-8
