Komatsu D375A-8, Operation & Maintenance Manual

Page: 292 / 466

6.
Fix the front side of the machine by installing a shackle to
the undercover hook and using wire ropes as shown in
Fig. (a).
7.
Fix the rear side of the machine by installing wire ropes to
the ripper mounting pin as shown in Fig. (b).
PROCEDURES FOR UNLOADING MACHINE
Unload on a firm and level ground.
1.
Park a trailer on a firm and level ground.
Secure a sufficient distance to the road edge.
2.
Apply the brake of the trailer securely.
3.
Set chocks (1) to the wheels to secure the trailer.
Set gap (3) between ramps (2) to match the distance be-
tween the right and left tracks, and keep angle (4) to a
maximum of 15 °.
If ramps (2) bend appreciably under the weight of the ma-
chine, put wooden block (5) under the ramps to support
them.
4.
Remove the chains and wire ropes fastening the machine.
5.
Start the engine.
In a cold weather, perform an engine warm-up operation, referring to “METHOD FOR ENGINE WARM-UP
OPERATION”.
6.
Set the work equipment lock lever to FREE position (F).
7.
Raise the work equipment.
(When transporting with work equipment installed)
TRANSPORTATION OPERATION
3-234