Komatsu D375A-8, Operation & Maintenance Manual

Page: 369 / 466

7.
Loosen the bolt (9) and separate the strainer (7) from mag-
net (8).
Tightening torque of bolt (9)46 to 59 Nm {4.7 to 5.9 kgm}
8.
Remove all dirt from strainer and wash it in clean diesel
fuel or flushing oil.
Clean the case interior and plugs as well.
9.
Install the strainer as before.
10. Loosen the mounting bolts (10) of the scavenging pump
strainer, and take out the strainer (11).
11. Remove all dirt from strainer (11), then wash it in clean die-
sel fuel or flushing oil.
Clean the case interior and the removed parts as well.
12. Loosen the bolt (12), remove the bracket (13) and cover
(14), and take out the strainer (15).
13. Remove all dirt from strainer (15), then wash it in clean
diesel fuel or flushing oil.
Clean the case interior and the removed parts as well.
14. After installing, replace the transmission and torque con-
verter filter element by referring to “METHOD FOR RE-
PLACING TRANSMISSION FILTER ELEMENT AND TOR-
QUE CONVERTER FILTER ELEMENT”.
15. Add the specified amount of oil through the oil filler port
(F).
16. After adding oil, check that the oil is at the specified level
by referring to “METHOD FOR CHECKING OIL LEVEL IN
POWER TRAIN CASE AND ADDING OIL”.
17. Store the hose (1) into the cover, and install the cover.
MAINTENANCE MAINTENANCE PROCEDURE
4-59