Bathtub masage systems
page 3
ENGLISH
www.kolpasan.eu
INSTRUCTIONS FOR INSTALLATION
For transport, your whirlpool is fully protected in a cardboard
box and forms a unit together with the wooden palette.
Figure
1
Take the tub out of the box.
CAUTION: The bathtub shall only be moved by holding its edge, by no means pipes
or wires.
First install the "S"-syphon, then place the tub on its intended location. Use the water level
balance to adjust the tub to the floor. The figure shows different bases used for whirlpools.
From the left: base incorporated into a built-in tub; reinforced base incorporated into a
built-in tub featuring cladding; corner-mounted tube base.
This is how to install the tub: use pencil to mark the position of elements on base's feet
(Figure 3), and tub's edge (Figure 4).
Figure
3
Figure
4
For optimal load capacity of the edge of the tub we recommend to install a tub with an
integrated wooden strip coated with a water-resistant coating.
Check Figure 5a for variants of bathtub's integration along the wall.
For more stability and load capacity of the edge we recommend to install a bathtub
featuring a special wall mounting kit available at authorised stores selling the Kolpa-san
product range. Check Figure 5b for variants of bathtub's integration along the wall.
Figure
5a
:
Figure
2
Summary of Contents for Kolpa-san Series
