Kolpa Kolpa-san Series, Instructions For Installation And Use Manual

Page: 17 / 98

Bathtub masage systems page 16
ENGLISH www.kolpasan.eu
MASSAGE CONTROL
The massage effect in your bathtub can be controlled manually and electronically, and is
affected by three factors, i.e. the direction of the current, the intensity of water and the
intensity of air. Each product made by Kolpa d.d. and equipped with adjustable jet nozzles
enables manual adjustment of the water's direction. Certain products feature additional jet
nozzles which enable the adjustment of the (water flow) intensity as well.
Direction: If you would like to change the direction of the water jet, turn the jet nozzle
opening to the desired angle. The jet nozzles can be individually turned towards any spot
on the body for water massage. The jet nozzles can also be adjusted so that they are all
turned in the same direction (clockwise or counter-clockwise), thus swirling the water in
circles and achieving the optimum massage effect.
Water intensity: Large and adjustable jet nozzles can be directed manually, thus
adjusting the flow of water running into the bathtub. For a more intense effect, increase
the intensity of the jet by turning the inner part of the jet nozzle to the left (counter-
clockwise). For a more gentle effect, turn the inner part of the jet nozzle to the right
(clockwise). Adjust the massage intensity by decreasing the water jet from one (1) jet
nozzle, whereby the massage intensity of the other jet nozzle(s) increases.
CAUTION! You should never activate the massage system while the jet nozzles are
completely closed
– at least HALF of all the water jet nozzles FOR EACH
INDIVIDUAL WATER PUMP (massage) must remain open. Otherwise, the water
pump of the pipes of the massage system may get damaged.
Air intensity: The intensity of the air in the water massage jet nozzles is controlled
manually by setting the air regulator located at the edge of the bathtub. The regulator can
be used to set the amount of air in the water jet nozzles for various water effects during
the water massage.
It cannot, however, be used to regulate the flow of air of the air massage (jet nozzles at
the bottom of the bathtub).
The changeover switch for the water massage jet nozzle function: Some massage
systems include a changeover switch that enables redirecting the flow of water to other
massage jet nozzles. Different bathtub models and massage systems come with different
changeover switches in terms of their number, colour and size.
WATER
FUNCTION
SWITCH
ADJUSTING WATER DIRECTION ADJUSTING WATER INTENSITY
AIR
FLOW
REGULATOR