Kolpa Kolpa-san Series, Instructions For Installation And Use Manual

Page: 32 / 98

Bathtub masage systems page 31
ENGLISH www.kolpasan.eu
the three automatic chromotherapy cycles:
Name of the cycle
Display will show:
Energy
»Pr.En«
Relax
»Pr.rE«
Tonic
»Pr.to«
7 second after last press of SETTING button, LED5 will switch off, while LED6 will
remain switched on and fixed. With Chromotherapy active, if you press CROMO
the system will return to colour change mode (LED6 and LED5 blinking) and
SETTING button has once again the function of selecting colours or automatic
cycles.
The function automatically stops if:
-
CROMO button is pressed for 2 seconds.
-
Function is timed out after 60 minutes (colors 1-8).
-
After the programmed cycles Energy, Relax or Tonic, finish their cycle.
Relax cycle - RELAXATION
The succession of Blue and Green colors evokes a general sense of wellness and
relax. Blue represents infinity, whereas Green rebalances mood, living a sense of
harmony and serenity. Colour changes are gradual. Table below shows the
duration of each single colour.
Color sequence
Time (in seconds)
BLUE 180 seconds
GREEN 120 seconds
BLUE 90 seconds
GREEN 60 seconds
BLUE 60 seconds
GREEN 90 seconds
BLUE 120 seconds
GREEN 180 seconds
Total cycle time: 15 minutes
Tonic cycle
– BALLANCE
The slow sequency of warm colours evokes a sense of wellness and physical
vigor, a sense of strength (Red), an increase of neuro-muscular tone (Yellow).
Those are interspersed by the most known rebalancing colour (Green) which gives
a rebalancing sensation. Colours fade gradually.
Table below shows the duration of each single colour.
Color sequence
Time (in seconds)
YELLOW 180 seconds
RED 180 seconds
GREEN 90 seconds
RED 60 seconds
YELLOW 60 seconds
GREEN 90 seconds
Total cycle time: 11 minutes