Kolpa Kolpa-san Series, Instructions For Installation And Use Manual

Page: 19 / 98

Bathtub masage systems page 18
ENGLISH www.kolpasan.eu
INSTRUCTION FOR THE DOSAGE OF WATER CARE AGENTS
(pH regulator, bromine, alba super and filter cleanser)

1. Ideal pH water value in the pools is 7,0
– 7,4

The pH value can be levelled with pH-PLUS and pH-MINUS regulator
pH regulator MINUS
pH regulator minus decreases the pH value from alkaline to neutral range
1,5kg pH minus suffice for 100m
3
of water in order to decrease for 0,2 of value
15g pH minus suffice for 1m
3
of water in order to decrease for 0,2 of value
75g pH minus per 1m
3
of water decreases the value for 1
pH regulator PLUS
pH regulator plus increases the pH water value from acid to neutral range
1kg pH plus suffice for 100m
3
of water in order to increase for 0,2 of value
10g Ph plus suffice for 1m
3
of water in order to increase for 0,2 of value
50g Ph plus per 1m
3
of water increases the value for 1
1 (one) tablespoon-full contains app. 15 mg of the pH-Plus or pH-Minus regulator
CAUTION! If the water's pH value is UNCHANGED after putting the regulator into the
water a few times, you MUST CHANGE THE WATER in the pool.
2. Bromine tablets-water disinfection

The ideal bromine value is 3-5 ppm (mg/l)
Bromine tablets have the same function as chlorine, however, bromine tablets do not
have such an intense odour as chlorine.
Dosage of bromine tablets: 1 tablet per 1m
3
of water
3. Alba super- algae prevention agent
Alba super is a concentrate for destroying algae and bacteria.
Alba super is a non-foaming agent for massage pools.
Dosage: 10ml of alba super per 1m
3
of water every 14 days.
4. Filter cleanser- filter cleaning agent
Every two weeks you must thouroughly clean the filter with the filter cleanser and then
rinse off the dirt that's still left with clear water.
Amount of water in the SAMSON massage bathtub
– 600L = 0.6m3
Amount of water in the GAIA massage bathtub
– 500L = 0.5m3