Kolpa Kolpa-san Series, Instructions For Installation And Use Manual

Page: 24 / 98

Bathtub masage systems page 23
ENGLISH www.kolpasan.eu
AIR MASSAGE SYSTEM
Picture
5 .
The system includes:

Electronic switch (Picture 5)

Air jets

Water level sensor
Air jet Air massage on/off
LED indicator - blue
Water temperature between 34°C and 40°C for 20 to 10 minutes is most suitable
for a pleasant massage.
Before using the massage system, fill the bathtub with water, which should not be
hotter than 50 °C and it should be at least 10 to 15 cm high.
The massage system is equipped with a water level sensor. When the sensor
detects adequate water level in the massage bathtub, it is possible to turn the
massage system on. Pressing the air massage button, Picture
5, switches the air
pump on. Pressing this button again, turns it off. After 15 minutes the massage
system automatically switches off.
Never turn on the system if the water level does not correspond with the
instructions.