Kolpa Kolpa-san Series, Instructions For Installation And Use Manual

Page: 34 / 98

Bathtub masage systems page 33
ENGLISH www.kolpasan.eu
CHILD LOCK function:
This function has the ability to lock the keypad if accidental activations are
attempted. The keypad can be locked by pressing at the same time buttons
WHIRLPOOL and CROMO for 5 seconds. The display will show
»Loc.«
for 7
seconds. Both buttons have a small picture of a key in their bottom right corner. If
there are functions active, they will continue their cycle automatically, but settings
could not be changed.
For safety reasons, if WHIRLPOOL or AIR buttons are pressed even while in
CHILD LOCK MODE, that function will be DEACTIVATED. If any other button is
pressed, the keypad shows
»Loc.«
and nothing happens
– no functions are
changed.
If you press again the WHIRLPOOL or AIR buttons, the functions will NOT
REACTIVATE.
The keypad can be unlocked in one of these five ways:
- Temporary Unlock: if you press at the same time buttons WHIRLPOOL and
CROMO for 5 seconds, display will show
»uLoc.«
The keypad will remain active
for 20 seconds, then it will return to Child Lock mode, the display will automatically
show
»Loc.«
for 7 seconds;
- Total Unlock 1: if you press at the same time buttons WHIRLPOOL and CROMO
for 10 seconds, (only in locked mode, not while temporarly unlocked) display will
show
»ULOC.«
for 7 seconds. All functions are active, the keypad remains
unlocked.
- Total Unlock 2: when the system detects not eough water
»h2o«
for 10 minutes,
the keypad will automatically unlock
- Total Unlock 3: When the system resumes from GENERAL OFF mode, the
keypad is allways unlocked
- Total Unlock 4: If the main power connection to the bathtub is cut (MAIN POWER
SWITCH) while keypad is locked, at the next activation the keypad will be
unlocked. The system allways starts from general off.