10.3
Prohibited use
—
AKMH motors should not be used in applications with continuous, direct contact with
food.
—
Standard AKMH cables are not sufficient for installation in food splash zones. When
applying in these applications, the tubing option for the cable is required.
—
Standard AKMH motors should not be applied in explosion-prone, hazardous envi-
ronments.
—
Standard AKMH motors should not be used in clean room applications.
—
AKMH motors should not be mounted vertically with shaft upwards to avoid harbo-
ring dirt, soil, and liquids.
—
Commissioning the motor is prohibited if the machine in which it was installed
- does not meet the requirements of the EC Machinery Directive,
- does not comply with the EMC Directive,
- does not comply with the Low Voltage Directive.
—
Built-in holding brakes without further equipment must not be used to ensure functio-
nal safety.
10.4
Handling
10.4.1
Transport
—
Climate category 2K3 according to EN61800-2, IEC 60721-3-2
—
Temperature
-25...+70°C, max. 20K/hr change
—
Humidity
rel. humidity 5% - 95% , no condensation
—
Only by qualified personnel in the manufacturer’s original recyclable packaging
—
Avoid shocks, especially to the shaft end
—
If the packaging is damaged, check the motor for visible damage. Inform the carrier
and, if appropriate, the manufacturer.
The motor should not be picked up by the cable! The cable bushing could
come loose or allow for contamination to get inside the motor, if the cable
must support the weight of the motor. This could lead to electrocution
hazard due to failure of electrical terminations.
10.4.2
Packaging
—
Cardboard packing with Instapak
®
foam cushion.
—
You can return the plastic portion to the supplier (see "Disposal").
Motor type
Packing
Max. sta-
cking height
Motor type
Packing
Max. sta-
cking height
AKMH2
Cardboard
8
AKMH5
Cardboard
4
AKMH3
Cardboard
5
AKMH6
Cardboard
1
AKMH4
Cardboard
5
Servomotors AKMH
English - 35
Kollmorgen
08/2013
Safety
ENGLISH
