13.2
Flange mounting, Face mounting
Galvanic corrosion could result in contamination of product, failure of
motor mounting and motor failure. Failure of the motor mounting could
lead to electrocution hazard due to failure of electrical terminations or the
motor cable as a result strain on the motor cable.
The motor housing is stainless steel. Avoid direct coupling of the motor to
more active metals such as aluminum or carbon steel to prevent galvanic
corrosion.
AKMH motors can be mounted either from the rear side of the flange or from the front
side.
Flange mount (A):
Through-bores allow moun-
ting with sealed screws
from rear side.
Face mount (C):
Threads allow mounting
with sealed screws from the
front side.
Use the optional AKMH mounting kits which will include the o-ring, the correct sealed
screws for flange and center shaft, to meet the hygienic requirements.
13.3
O-ring sealing
Place the FDA approved o-ring (mounting kit) to to the groove of the motor flange (see
graphics above), then press the motor to the counter flange (for example the gearbox
flange) and fix the sealed screws.
Servomotors AKMH
English - 47
Kollmorgen
08/2013
Mechanical Installation
ENGLISH
O-Ring
