110
⑧
Click [Record] to record results
of Plane Offset.
[Record]
⑨
Click [Enter] to save measuring
results.
Repeat steps
⑦
～
⑧
to finish
measuring other points on the
plane.
[Enter]
※
1) [On]
：
Function key used to display “Plane Offset”. In SS Measurement screen “Plane Offset
Mode” shows
[Off]
：
Function key used to shut “Plane Offset”.
11.4.3 Pt. Line Mode (For Measurement from Point to Line)
This mode is used for coordinate measurement of target points P which treats A (0,0,0)
as the origin and line AB as the N axis. See below
：
A: reference point 1 B: reference point 2
●After measuring coordinates of point A, B, enter Point & Line Measurement Mode.
Set A, B as reference point 1, 2. Set once again a coordinate system which has A as
origin and line AB as N axis. Start measurement again. (Never change information of
