160
③
Click
FNC
Key
[+CHG]/[-CHG] to search data
forward
or
backward;
click
[LOFS]/[ROFS]
to
display
neighboring offset and elevation on
the cross section.
④
Select the chainage to be set
out, and input the prism height of
the target. Then click [Set Out] to
start setting out. The method of
setting out is the same as that of
alignment.
※
The Height Difference value is elevation value here. (Different to Horizontal
Alignment Setting out)
[Note]
：
1)
Cross Section data can not be entered nor edited by manual input; it has to be
copied into WIN total station.
OPERATIONAL STEPS
：
①
Create a new text file (.txt) on the computer and save it. See Appendix A for the
format of cross section data.
②
Copy the file to total station.
③
In the total station, import the saved data to current project by “Data Import”. See
“10.2 Data Import”.
2) You can use [LOFS]/[ROFS] to display appointed chainage. The sequence of the
displayed data is according to the sequence in text file. Enter the data in the order of its
offset values (from left to right), if chainages are the same.
3)
When editing the cross section data, chainages should be in the order from little to
much.
