KOKEN LM-095N, Instruction Manual

Page: 53 / 56

51
◯ Fetus orientation setting
Fetus orientation is selected from among A, RA, RT, RP, P, LP, LT and LA, using the "Orientation” pull-
down menu. The orientation can be selected only if the fetus 8~9 cm uterus dilation model and the
fetal head model have been selected as the model targeted for adjustment, or if the uterus 8~9 cm
uterus dilation model and the fetal head model have been selected as the model for adjustment.
◯ Movement setting
This moves models separately from the reference position. The movement distance can be
specified for each of the X, Y and Z axis directions.
◯ Rotation setting
This rotates the model, assuming the coordinate axes of the reference position are in the center of
the model. The angle can be specified individually around the X, Y and Z axis, and the result will be
rotated in the sequence of X axis → Y axis → Z axis.
◯ Scale setting
This enlarges or reduces the size of the overall model. Setup can be specified individually for the X,
Y and Z axis directions, or the scale can be set for the model as a whole.
Enlargement in the
X axis direction
Reduction in the X, Y
and Z axis directions
X axis
rotation
Y axis
rotation Z axis
rotation
Moving the
pelvis in the X
axis direction
Enlargement in the
X axis direction
Reduction in the X, Y
and Z axis directions
X axis
rotation
Y axis
rotation Z axis
rotation
Moving the
pelvis in the X
axis direction
Enlargement in the
X axis direction
Reduction in the X, Y
and Z axis directions
X axis
rotation
Y axis
rotation Z axis
rotation
Moving the
pelvis in the X
axis direction