KOKEN LM-095N, Instruction Manual

Page: 37 / 56

35
3) Operation of functions
This section explains how to adjust the displayed image, change viewpoints, and measurement the
distance between two points.
（1）Adjusting the displayed image
There are two ways to change the display status of the model: simple Setup, for which the Select
Images dialog box is used; and detailed Setup, for which the Setup Of Image Details dialog box is
used.
Simple Setup such as turning displays on or off are done using the Select Images dialog box, while
more detailed Setup such as specifying the transparency of the model and the color in which the
model is displayed are adjusted using the Setup Of Image Details dialog box.
(a) Select Images
Selecting “Display” and then "Select Images” on the menu displays the Select Images dialog box.
This can be used to make simple adjustments to the display status of the model.
The following parameters can be adjusted.
◯ Display on/off for each model
◯ Uterus model selection
◯ Fetus orientation selection
◯ Light source position selection
◯ Initialization of all Setup
◯ Display on/off for each model
This turns the model display on and off for individual models. When the menu item is checked, the
display is on, and when the menu item is unchecked, the display is off.
This item applies to the fetus, pelvis, uterus and finger models, and can also be used to turn the 0
Station display on and off.
Initialization of all settings
Uterus model selection
Fetus orientation selection
Light source position selection
Display on/off
The display of the
uterus is turned off.
Initialization of all settings
Uterus model selection
Fetus orientation selection
Light source position selection
Display on/off
The display of the
uterus is turned off.