50
◯ Initialization
Clicking on the [Initialize] button resets all the Setup entered for the Whole Adjustment Of Model,
including movement, rotation and scale, and returns to the reference position.
◯ Apply
The [Apply] button is used to reflect the results after adjustments are made. If the [X] button is
clicked to close the dialog box without first clicking the [Apply] button, values will return to the
values used prior to adjustment. This has the same effect as clicking the [Cancel] button.
◯ Cancel
This returns the model to the state just after the "Whole Adjustment Of Model” dialog box was
displayed, and ends the adjustment. If the [Apply] button was clicked during the adjustment and
the updated model position was displayed, it returns to that state.
(2) Individual Adjustment Of Model
Individual model positions are adjusted using the "Individual Adjustment Of Model” dialog box,
which is displayed by selecting "Setup" and then "Individual Adjustment Of Model” from the menu.
◯ Model for adjustment
The model for which the position is to be adjusted is selected using the “Model for Adjustment”
pull-down menu. If the fetus 8~9 cm uterus dilation model and fetal head model are selected, or
the uterus 8~9 cm uterus dilation model and fetal head model are selected, the “Fetus Orientation
Setting” pull-down menu is enabled, and orientation of the fetus can be selected. The positions in
each direction of the fetus 8~9 cm uterus dilation model and fetal head model, and of the uterus
8~9 cm uterus dilation model and the fetal head model can be specified.
If the model to be adjusted is not displayed, the following Setup need to be entered in the "Select
Images” dialog box in order to display the model.
・Display on/off in the "Select Images" dialog box: This must be set to "On” for all models.
・Match Uterus Model: This is used if adjusting the uterus.
・Match Orientation: This is used if adjusting the 8~9 cm uterus dilation model of the fetus or
uterus, or the fetal head model.
Scale setting
Initialize
Apply
Cancel
Fetus orientation setting
Rotation setting
Model for adjustment
Movement setting
Summary of Contents for LM-095N
Page 2: ......
Page 56: ...54 11 Specifications...
