KOKEN LM-095N, Instruction Manual

Page: 32 / 56

30
7. Handling of the Virtual Reality Vaginal Exam Model
*This model is made of a special silicone rubber with a feel similar to that of the human body. Please
handle it with the same care that you would exercise when working with a human body.
1) Applying lubricant
Using a finger, apply a generous amount of glycerin to the vaginal walls and vaginal cavity of
the vulva for vaginal exam II, and to the uterus opening of the uterus dilation model that will be
inserted.
2) Setting the uterus dilation model in place
Set the uterus dilation model on the plate that secures it in place, and tighten the exclusive screws
to secure the uterus dilation model in place.
(1) Setting the 1~2 cm and 3~4 cm uterus dilation models in place
Vaginal walls Vaginal cavity Uterus dilation model
Tighten the exclusive screws
to secure the uterus dilation
model in place.
Secure the uterus
dilation model
Insert the dilated uterus model from the
direction indicated by the arrow, until the
dilated uterus model comes in contact with
the plate that secures it in place.
Insert the uterus dilation model until it comes in
contact with the plate that secures it in place.
Align the line on the uterus dilation model
with the plate that secures the model, to
secure it in place.